EV coolant -37°C 5 l

Art.No. 376005

AdProLine® Ready-mixed EV coolant is a specially developed coolant with reduced conductivity for indirect cooling of battery packs in electric cars. Prevents freezing and contains an inhibitor package that provides long-lasting all-round protection against corrosion. Thanks to the unique combination of inhibitors and stabilisers, Ready-mixed EV coolant ensures low and stable electrical conductivity over a long period in the cooling system. Ready-mixed EV coolant provides effective frost protection down to -37°C.

Properties
Ready-mixed EV coolant must not be mixed with conventional coolants. It is miscible with other low-conductivity coolants based on monoethylene glycol with similar conductivity. The product is ready to use and consists of monoethylene glycol and an inhibitor package based on proven OAT technology. Ready-mixed EV coolant must not be used in traditional cooling systems or fuel-cell applications. Ethylene glycol is toxic and must not be ingested. It is biodegradable, and releases of small quantities do not disrupt the degradation stages at wastewater treatment plants.

Specification
Recommended for, among others, the following vehicles and specifications: Delta Cosworth, Hyundai spec. 00232-19091, Hyundai spec. 07100J2A20EU, Hyundai spec. BSC-1, Hyundai spec.. BSC-2, Kia spec. UM020-CH237, Kia spec. 07100J2A20EU, Kia spec. BSC-1, Kia spec. BSC-2, Tata Harrier EV.

Recommended for the following standard: GB 29743.2 - 2025 and ASTM D8566

Storage
Arom-dekor recommends routinely measuring the fluid's pH and conductivity before filling, which is particularly important if the product has been stored for more than one year. Store at a temperature not exceeding 30°C and out of direct sunlight. Storage in direct sunlight and at high temperatures may impair the coolant's properties. Must not be stored in transparent (see-through) packaging.

Handling instructions
Before filling or topping up with Ready-mixed EV coolant, flushing the system with deionised water with conductivity below 100 μS/cm is recommended. After flushing, the system must be drained of all fluid.

EV coolant -37°C 5 l